...
✔ Step 5 – PA POS Adapter setup and scheduling (30-minutes)
Step 1 – Validate minimum hardware and software requirements
iOS Software and Hardware Minimum Requirements
iPad or iPad mini (Wi-Fi Only) (Client to purchase)
iPad Mini 5th Gen (2019) or newer
iPad 6th Gen (2018) or newer
iPad Air 3rd Gen (2019) or newer
iOS 14 or higher
Note: Future state for Kiosk will require iOS 15
NCR Aloha Software Minimum Requirements
Aloha Back-of-House (BOH) server or dedicated interface server
NCR Aloha 12.3 or higher
Aloha Connect license (Obtained from NCR Aloha)
2 External Interface Terminal (EIT) licenses or Interface Terminal licenses
Aloha Transaction Gateway (ATG)
Network Minimum Requirements
Secure Wi-Fi___33 for the iPads
Internet access for POS Adapter and iPads (business class router recommended)
Step 2 - MenuPad Firewall Whitelisting
Complete whitelisting details are here
Your teams will need to validate prior to Omnivore installation these ports are whitelisted
Note: Inbound firewall access is not required
Step 3 - Aloha Remote POS System Access
Complete Aloha remote POS setup instructions are here
Your teams will need to provide MM access to their lab, if applicable.
BOH (Back of house) Windows credentials
CFC user with read only access
Client VPN or Site to Site Tunnel to provide Mad Mobile the ability to connect to the POS Adapter running in the lab (or production site).
Staff PINs with various level of access to the terminal
Manager PIN
Employee PIN
Note: Goal is different job codes.
Schedule time with MM and Omnivore to install Omnivore (1 hour block of time required)
IMPORTANT: See Omnivore below for further details
Schedule time with MM to install and configure POS Adapter (30 minutes required)
Step 4 - Omnivore (only required for Aloha)
Complete instructions are here
Your teams will be responsible for the following:
Create account on Omnivore panel
Create locations under Dev for lab locations or Prod for production locations
Add MenuPad via application per location
Mad Mobile will accept the invite
Self-install Omnivore or request an install session with MM to coordinate with Omnivore Support
Request Omnivore to enable local mode for all locations
Notes: The Omnivore Location port ID is usually 4462
Recommend Your teams to manage their own production Omnivore installs
Step 5 - POS Adapter (PA) Installation
MM Customer Support/Onboarding Team will be responsible for the client install.
Note: Client is responsible for the production installs after the initial install is complete.
Configuration settings will be managed by Mad Mobile.
Note: Change requests are required to modify cloud configurations
Note: Omnivore & POS Adapter need to run on the same machine
How to Install MenuPad Application
MenuPad application is available on the App store
MenuPad will require the IP Address/Port to be setup via iPad Settings
iOS Settings > MenuPad > MenuPad Settings: “Host IP address:port”
...
Device Naming Convention Example below
MDM (Mobile Device Management) makes it easier deploy the application and lockdown iPads
Note: Recommended device names for Support to provide better assistance
<Customer>-<StoreNumber><DeviceID>-<DeviceType>
Ex: MM-1234-USMC3020-iPadMini5